Description
- The Synco WAir-G2-A2 is an ultracompact, digital wireless microphone system with two microphones and just one receiver—great for shooting two-person videos for Instagram, YouTube, and TikTok. It offers a complete, versatile, and simple-to-use solution for recording dialogue, interviews, and speech directly to a mirrorless/DSLR camera or a mobile device with a 3.5mm input.
TFT Display to Show Key Figures
The SYNCO dual wireless microphone system G2(A2) distinguishes itself from G2(A1) by having the other transmitter to achieve the recording of 2-person dialogue and the flexibility of output modes, and differs from G1(A2) by a true-color TFT display on both transmitter and receiver to make each key figure such as recording mode and battery status, readable under different light intensities.
Upgraded Algorithm for Stable Signal Transmission within 200m
The SyncoderTM Encrypted Transmission Algorithm 4.0 enhances the signal stability of the dual digital microphone system within 656ft/200m (Line-Of-Sight) and 164ft/50m (Non-Line-Of-Sight) effective range. It runs the Frequency Hopping Spread Spectrum (FHSS) technique to detect the location on it’s own intuitive and then by itself turns to the optimal frequency so that no signal conflicts would occur.
Best Dual Wireless Microphone for Flexible Audio Adjustments
A button is set to mute the system for a while when it comes to team communication, device setup, etc., rather than completely turning off the system. Find this function also in mini wireless microphone G1T/L.
Safety Channel Mode to Avoid Audio Spikes
The G2(A2) dual wireless microphone comes with three recording modes - Mono, Stereo, and Safety Channel. When the Safety Channel mode is activated, the audio recorded into the right channel will be 6dB lower. This works to avoid unforeseen audio spikes caused by noises from vehicles, weather, etc
With OLED display, real-time display of power and connection signal.
The farthest barrier-free straight-line working distance ≥50, the obstacle straight-line working distance ≥30.
150Hz low cut, with monitoring system, work & battery indicator, external and built-in microphone, 4-level volume adjustment.
Convenient to carry, easy to use, super light 52*42*16mm, 35g design.
Battery life ≥5 hours,1.5 hour full charge.
Transmitter (TX )
Wireless Transmission: Digital 2.4GHz
RF Frequency Band: 2400-2483.5MHz
Working Distance: 656ft/200m (LOS area);
164ft/50m (NLOS area)
Mounting: Pocket Clip
Audio Input: 3.5 mm TRS Mic Input
Power Requirements: 5V 1A
Battery Type: Built-in Lithium Battery, 400mAh
Battery Charging Time: 2H
Battery Life: 8H
Display Screen: TFT Screen
Material: ABS
Weight: 39g
Microphone
Form Factor: Built-in/External Mic
Frequency Range: 50Hz-20KHz
Sensitivity: -40dB (±3dB, re 1V/Pa at 1 KHz)
Maximum SPL: 120dB SPL (at 1KHz)
Receiver (RX)
Wireless Transmission: Digital 2.4GHz
RF Frequency Band: 2400-2483.5MHz
Working Distance: 656ft/200m (LOS area);
164ft/50m (NLOS area)
Latency: 20ms
Mounting: Pocket Clip
Number of Audio Channels: 2
Audio Output: 3.5 mm TRS Mic Output;
3.5 mm TRS Headphone Output;
Type-C Output
Volume Adjustment: 6 levels (0-3-6-9-12-15)/(0~30dB)
Power Requirements: 5V 1A
Battery Type: Built-in Lithium Battery, 400mAh
Battery Charging Time: 2H
Battery Life: 8H
Display Screen: TFT Screen
Material: ABS
