Description
- The SYNCO G2(A1) is a portable wireless microphone of SYNCO running at 2.4GHz band. It is reborn with a display, making all key indicators seeable. It continues processing the input audio via patented technology and sending clean, clear audio based on 2.4GHz digital transmission technology. Similar to the G1, the G2 wireless microphone system also comes in 2 forms, including this 1-to-1 G2(A1) and the 1-to-2 G2(A2). The G2(A1) with one transmitter and one receiver, is an excellent wireless mic solution for content creators in every field: stage performers, on-camera presenters, vloggers and more.
Brandnew TFT Display as Strong Boost to SYNCO Portable Microphone Wireless at 2.4 GHz
Different from G1, either the transmitter or the receiver of this new microphone wireless at 2.4G carries a true-color TFT display to make the device readable under different light intensities. The recording mode, battery status, and audio level are all seeable.
Upgraded Algorithm for More Stable, Safe Transmission
The SyncoderTM Encrypted Transmission Algorithm 4.0 in this professional small wireless microphone enhances the signal stability within 656ft/200m (Line-Of-Sight) and 164ft/50m (Non-Line-Of-Sight) effective range. It is the Frequency Hopping Spread Spectrum (FHSS) technique that on it’s own intuitive detects the location and then turns to the optimal frequency so that no signal conflicts would occur. This also helps protect privacy and reduce interference.
Small Features Packed For Each Optimization
A button is designed to mute this portable wireless microphone for a while rather than turning off the whole system when team communication, device setup, etc. is a must. The one-click noise reduction, gain control on both transmitter & receiver, and real-time monitoring of recorded & input sounds function to give a wider range of adjustment, hence making sure that the system works under more conditions.
Safety Channel Mode for Audio Backup
The G2(A1) comes with two recording modes - Mono mode and Safety Channel mode. The Safety Channel mode is activated by a press on the On/Off button of the receiver. The audio recorded to the right channel is 6dB lower under this mode, thus avoiding audio spikes and offering audio backup.
Integrated Signal Processing for Little Latency Sound Production
The Digital Signal Processor (DSP) chip in the SYNCO G2 optimizes the signal from input to output directly. The full synchronization of signal capture, processing, and delivery guarantees almost no latency in transmission and high quality in sound production, excellent for immediate use and suitable for live streaming.
Quick Charge for Every Continued Filming
The 2-in-1 charging solution allows simultaneous charging of the wireless microphone receiver and transmitter with only one power source. It takes only 40 mins to get the device 50% powered and 1 hour for 80%. The enhanced battery supports 8-hour continued recording if fully charged.
Portable Wireless Microphone SYNCO G2(A1)
Brandnew TFT Display as Strong Boost to SYNCO 2.4 GHz System
Upgraded Algorithm for More Stable, Safe Transmission
Integrated Signal Processing for Little Latency Sound Production
Quick Charge for Every Continued Filming
Small Features Packed For Each Optimization
Pocket Size for Invisible but Audible Effect
Transmitter (TX)
Wireless Transmission Digital 2.4GHz
RF Frequency Band 2400-2483.5MHz
Working Distance 656ft/200m (LOS area); 164ft/50m (NLOS area)
Mounting Pocket Clip
Audio Input 3.5 mm TRS Mic Input
Power Requirements 5V 1A
Battery Type Built-in Lithium Battery, 400mAh
Battery Charging Time 2H
Battery Life 8H
Display Screen TFT Screen
Dimensions 52X42X17mm
Material ABS
Weight 39g
Microphone
Form Factor Built-in/External Mic
Frequency Range 50Hz-20KHz
Sensitivity -40dB (±3dB, re 1V/Pa at 1 KHz)
Maximum SPL 120dB SPL (at 1KHz)
Receiver (RX)
Wireless Transmission Digital 2.4GHz
RF Frequency Band 2400-2483.5MHz
Working Distance 656ft/200m (LOS area); 164ft/50m (NLOS area)
Latency 20ms
Mounting Pocket Clip
Number of Audio Channels 2
Audio Output 3.5 mm TRS Mic Output; 3.5 mm TRS Headphone Output; Type-C Output
Volume Adjustment 6 levels (0-3-6-9-12-15)/(0~30dB)
Power Requirements 5V 1A
Battery Type Built-in Lithium Battery, 400mAh
Battery Charging Time 2H
Battery Life 8H
Display Screen TFT Screen
Dimensions 52X42X17mm
Material ABS
Weight 39g
