Description

  • The AT8024 Stereo/Mono Camera-Mount Microphone by Audio-Technica is ideal for capturing high-quality audio with DSLR and video cameras in various settings like weddings and sports events. It offers selectable line-cardioid mono and mid-side stereo modes for focused or wide-field recording, significantly improving audio quality over internal camera microphones. It features a three-position adjustable input pad, switchable low-frequency roll-off, and integral camera shoe mount. Powered by a single AA battery, it includes a 39″ coiled cable, windshield, fuzzy windscreen, and features rubber shock mounts for vibration isolation.

Mono/Stereo Modes

The AT8024 Stereo/Mono Camera-Mount Microphone by Audio-Technica offers selectable line-cardioid mono and internally matrixed mid-side stereo modes. This flexibility allows you to focus the recording on a single sound source for clarity or widen the field for greater sonic realism, making it ideal for various environments like weddings, conferences, and sports events.

Adjustable Input Pad

Equipped with a three-position adjustable input pad (-20 dB, -10 dB, 0 dB), the AT8024 can capture both soft and very loud sound passages without distortion. Additionally, the switchable low-frequency roll-off reduces the pickup of undesired ambient noise, room reverberation, and mechanical vibrations, ensuring clean, high-quality audio.

  • Designed for use with DSLR and other video cameras, delivering dramatically better sound quality than the camera’s internal microphone
  • Selectable line-cardioid mono or mid-side stereo modes provide the flexibility to capture high-resolution audio in any environment
  • Handles loud sound sources without distortion
  • Three-position adjustable attenuator and switchable low-frequency roll-off
  • Integral rubber shock mounts isolate the microphone from vibration and mechanical camera noise
  • Compact, lightweight design with integral shoe mount
  • Red/green LED power indicator
  • Includes windscreen, fuzzy windscreen and AA battery
  • Element: Fixed-charge back plate, permanently polarized condenser

  • Polar Pattern: Line-cardioid, LR stereo

  • Frequency Response: 40-15,000 Hz

  • Low Frequency Roll Off: 80 Hz, 12 dB/octave

  • Open Circuit Sensitivity: –37 dB (14.1 mV) re 1V at 1 Pa (Mono & LR Stereo)

  • Maximum Input Sound Level: 128 dB SPL, 1 kHz at 1% T.H.D.

  • Dynamic Range: Mono: 106 dB, 1 kHz at Max SPL; Stereo: 104 dB, 1 kHz at Max SPL

  • Signal-to-Noise Ratio: Mono: 72 dB, 1 kHz at 1 Pa; Stereo: 70 dB, 1 kHz at 1 Pa

  • Battery Type: 1.5V AA

  • Battery Current/Life: 80 hours typical

  • Switches: Mono, M-S Stereo; Three-position input pad; Flat, roll-off

  • Weight: 114 g

  • Cable: Permanently attached 0.2 m -1 m (7.8″- 39.3″) coiled cable with right-angle molded 3.5 mm stereo mini-plug at output end

  • Dimensions: 172 mm (L) x 82 mm (H) x 30mm (W)

  • Output Connector: 3.5 mm stereo mini-plug on cable

  • Accessories Included: AT8124 Windscreen; AT8124F Fuzzy windscreen; AA battery

Additional information

Weight 0.6 kg
Dimensions 29.97 × 13.46 × 7.62 cm

Reviews

There are no reviews yet.

Be the first to review “Audio-Technica AT8024 Stereo/Mono Camera-Mount Microphone”

Your email address will not be published. Required fields are marked *