Description
Shibata Stylus & Boron Cantilever
The AT-VM750xSH features a lightweight Nude Shibata stylus that provides greater groove contact for detailed high-frequency reproduction with low distortion. Its solid boron cantilever transfers vibrations quickly and accurately, making dynamic musical passages sound more precise and lifelike.
Premium Sound & Low-Resonance Design
Its PCUHD paratoroidal coils, center shield plate, and 90° V-shaped dual-magnet design deliver excellent channel separation, clear stereo imaging, and an expansive soundstage. The die-cast aluminum body helps reduce unwanted vibration and resonance for clean, detailed vinyl playback.
- AT-VMx dual moving magnet cartridge with Shibata stylus.
- Shibata stylus provides long line of contact with the record groove, enabling the pickup of ultra-high frequencies with minimal abrasion and distortion.
- Significantly lighter stylus tip (compared to previous model) allows for more precise tracing of the record groove.
- Solid boron cantilever quickly transmits vibrations from the record groove, ensuring accurate reproduction of dynamic musical passages.
- Die-cast aluminum housing reduces vibrations and resonance.
- Paratoroidal coils improve generating efficiency for enhanced channel separation, channel balance, and transient response.
- PCUHD (Pure Copper Ultra High Drawability) coils – and fewer coil turns – deliver highly responsive, three-dimensional sound reproduction with excellent transient response.
- Center shield plate between the left and right channels reduces crosstalk for clear stereo sound.
- Threaded inserts make cartridge easier to mount, especially to integrated tonearms.
- V-cut in the flip-up stylus protector shows stylus position, serving as a guide for lowering the stylus onto a record.
- Compatible with any turntable headshell that accepts 1/2″ cartridges.
- Compatible with most AT-VMx series replacement styli (excludes mono models), offering a wide choice of options for every budget and application.
Frequency Response: 20 to 27,000 Hz
Channel Separation: 26 dB (1 kHz)
Vertical Tracking Angle: 20°
Tracking Force: 1.8 to 2.2 g (2.0 g standard)
Stylus Construction: Nude Shibata
Recommended Load Impedance: 47 k ohms
Coil Impedance: 3.2 k ohms (1 kHz)
DC Resistance: 750 ohms
Coil Inductance: 480 mH (1 kHz)
Output Voltage: 3.7 mV (1 kHz, 5 cm/sec.)
Output Balance: 1.0 dB (1 kHz)
Cantilever: 0.28 mm (0.011”) diameter solid boron
Static Compliance: 20 × 10-6 cm/dyne
Dynamic Compliance: 7 × 10-6 cm/dyne (100 Hz)
Dimensions: 29.0 mm (1.1”) × 18.3 mm (0.72”) × 17.5 mm (0.69”) (H × W × D)
Accessories Included: ・Cartridge installation screws** (M2.6) (10.0 mm (0.39”) × 2, 8.0 mm (0.31”) × 2, 5.0 mm (0.20”) × 2), Washer × 2, Non-magnetic screwdriver, Brush
Threaded Hole: M2.6 × 2
Recommended Load Capacitance: 150 to 250 pF
Replacement Stylus: AT-VMN50xSH* (sold separately)
Stylus Curvature Radius: 2.7 × 0.26 mil
Type: VM
Weight: 8.8 g (0.31 oz)
Notes: *The replacement stylus of this product is used for AT-VMx series products. In this series, we offer replacement styli with different stylus tip structures and point shapes.
**Cartridge installation screws (5.0 mm (0.20”)) x 2 are used to secure the cartridge in the box at the time of purchase. Be sure to keep and not lose these after removing the cartridge from the box.
For product improvement, the product is subject to modification without notice.
