Description
Special Line Contact Stylus
The nude Special Line Contact stylus and boron cantilever provide highly accurate groove tracking, delivering rich, detailed sound, excellent transient response, and precise vinyl reproduction.
Pure Audio Performance
Dual moving coils with PCOCC copper coils, a neodymium magnet, and permendur yoke provide excellent channel separation, clean signal transmission, increased magnetic energy, and reduced distortion.
- Dual Moving Coil design, featuring independent coils for both left and right channels, provides outstanding channel separation.
- The coils are aligned in a reverse V-shaped formation, which exerts less pressure on the stylus, thereby minimizing distortion.
- The cartridge body is pre-threaded, enabling it to be mounted onto the headshell or integral tonearm with just two screws – no nuts required.
- Features nude Special Line Contact stylus and boron cantilever with accurate tracking ability and high transient response.
- A neodymium magnet and permendur yoke provide dramatically increased magnetic energy.
- Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction.
- Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer.
Frequency Response: 20-50,000 Hz
Channel Separation: 28 dB (1 kHz)
Vertical Tracking Angle: 20°
Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
Stylus Construction: Nude rectangular shank
Recommended Load Impedance: Min. 100 ohms (when head amplifier is connected)
Coil Impedance: 12 ohms (1 kHz)
DC Resistance: 12 ohms
Coil Inductance: 25 mH (1 kHz)
Output Voltage: 0.4 mV (at 1 kHz, 5 cm/sec)
Output Channel Balance: 0.5 dB (1 kHz)
Stylus Shape: Special Line Contact
Cantilever: 0.28 mm diameter nude boron
Static Compliance: 22 x 10-6 cm/dyne
Dynamic Compliance: 18 x 10-6 cm/dyne (100 Hz)
Mounting: Half-inch
Cartridge Weight: 7.6 g (0.3 oz)
Dimensions: 17.3 mm (0.68″) H × 16.8 mm (0.66″) W × 25.7 mm (1.01″) D
Accessories Included: Non-magnetic screwdriver; 2 washers; cartridge installation screws (5 mm × 2, 8 mm × 2, 10 mm x 2, 12 mm x 2); plastic protector; brush
Body Material: Aluminum
Model: AT-OC9XSL
Mounting Feature: Half-inch mount
Stylus Curvature Radius: 1.5 x 0.28 mil
Stylus Size: Nude rectangular shank
Terminal Pins: Brass
Type: Dual Moving Coil
Wire Used for Coil: PCOCC
Notes: Mounting Feature: Threaded body Note: moving coil cartridges require receivers or preamps with compatible inputs; their stylus assemblies are not field-replaceable.
