Description
Precise Tracking & Detailed Sound
The low-mass nude elliptical stylus and aluminum cantilever accurately follow record grooves, delivering excellent channel separation, improved frequency response, high transient detail, and smooth, low-distortion vinyl playback.
Pure Signal & Low Resonance
PCOCC copper coils, a neodymium magnet, pure iron yoke, and rigid aluminum body work together to provide clean signal transmission, increased magnetic energy, reduced resonance, and clear, dynamic audio reproduction.
- Dual Moving Coil design, featuring independent coils for both left and right channels, provides outstanding channel separation.
- The coils are alOhnod in a reverse V-shaped formation, which exerts less pressure on the stylus, thereby. minimizing distortion
- The cartridge body is pre-threaded, enabling it to be mounted onto the headshell or integral tonearm with just two screws – no nuts required.
- Features low mass nude elliptical stylus and aluminum cantilever.
- A neodymium magnet and pure iron yoke provide increased magnetic energy.
- Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction.
- Pure copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer
Frequency Response: 20-30,000 Hz
Channel Separation: 25 dB (1 kHz)
Vertical Tracking Angle: 20°
Vertical Tracking Force: 1.8-2.2 g (2.0 g standard)
Stylus Construction: Nude square shank
Recommended Load Impedance: Min. 100 ohms (when head amplifier is connected)
Coil Impedance: 12 ohms (1 kHz)
DC Resistance: 12 ohms
Coil Inductance: 25 mH (1 kHz)
Output Voltage: 0.35 mV (at 1 kHz, 5 cm/sec)
Output Channel Balance: 1.5 dB (1 kHz)
Stylus Shape: Elliptical nude
Cantilever: Aluminum pipe
Static Compliance: 20 x 10-6 cm/dyne
Dynamic Compliance: 9 x 10-6 cm/dyne (100 Hz)
Mounting: Half-inch
Cartridge Weight: 7.6 g (0.3 oz)
Dimensions: 17.3 mm (0.68″) H × 16.8 mm (0.66″) W × 25.7 mm (1.01″) D
Accessories Included: Non-magnetic screwdriver; 2 washers; cartridge installation screws (5 mm × 2, 8 mm × 2, 10 mm x 2, 12 mm x 2); plastic protector; brush
Body Material: Aluminum
Model: AT-OC9XEN
Mounting Feature: Half-inch mount
Stylus Curvature Radius: 0.3 x 0.7 mil
Stylus Size: Nude square shank
Terminal Pins: Brass
Type: Dual Moving Coil
Wire Used for Coil: PCOCC
Notes: Mounting Feature: Threaded body Note: moving coil cartridges require receivers or preamps with compatible inputs; their stylus assemblies are not field-replaceable.
